Gutter cost estimator
A budgeting range for your house in a few inputs, built on typical Seattle-area and national ranges. It updates as you type, and the link saves your inputs.
Budgeting range
$1,470 to $2,575
| 5-inch seamless aluminum gutters | $1,200 to $1,950150 ft at $8 to $13 per linear foot (typical Seattle-area range, 5-inch seamless aluminum installed) |
|---|---|
| Downspouts | $120 to $3004 at $30 to $75 each (national budgeting range, standard aluminum downspout); taller runs, copper and buried connections cost more |
| Taking down old gutters | $150 to $325$150 to $325 per job (typical Seattle-area range, take down and haul away) |
- Fascia repair, buried downspout connections and difficult access are not included; they are priced after the walk-around.
- Washington sales tax applies to the whole contract, labor included: 10.4% at most Kent addresses. It is not added to these figures.
This is arithmetic on published budgeting ranges, not a quote and not Gutters of Kent’s rates. The walk-around sets the real number.
How the estimate is built
Each line multiplies your input by a published range: about $8 to $13 per linear foot for 5-inch seamless aluminum (a typical Seattle-area range), about $15 to $40 per foot for copper (a national budgeting range), about $30 to $75 per standard downspout (national), about $150 to $325 to take down old gutters (Seattle-area), and about $4 to $11 per foot for mesh guards (Seattle-area) or $15 to $45 per foot for an installed guard system (national).
It does not add a percentage for a second story or for 6-inch gutters, because there is no reliable published figure for either; it tells you when they push a job toward the high end instead. Fascia repair, buried downspout connections and hard access are left out because they can only be priced on site. Washington sales tax, 10.4% at most Kent addresses, applies to the whole contract and is not included. The Kent gutter cost guide explains each range.
Get an exact quote.
Send the address and the footage you entered. The walk-around measures each roof edge and turns the range into a number.
(253) 352-5321